日本熟妇hd丰满老熟妇,中文字幕一区二区三区在线不卡 ,亚洲成片在线观看,免费女同在线一区二区

C++ SDK收發消息

本文介紹如何使用C++ SDK通過接入點接入云消息隊列 Kafka 版并收發消息。

環境準備

您已安裝GCC。更多信息,請參見安裝GCC

安裝C++依賴庫

  1. 執行以下命令切換到yum源配置目錄/etc/yum.repos.d/

    cd /etc/yum.repos.d/
  2. 創建yum源配置文件confluent.repo

    [Confluent.dist]
    name=Confluent repository (dist)
    baseurl=https://packages.confluent.io/rpm/5.1/7
    gpgcheck=1
    gpgkey=https://packages.confluent.io/rpm/5.1/archive.key
    enabled=1
    
    [Confluent]
    name=Confluent repository
    baseurl=https://packages.confluent.io/rpm/5.1
    gpgcheck=1
    gpgkey=https://packages.confluent.io/rpm/5.1/archive.key
    enabled=1
  3. 執行以下命令安裝C++依賴庫。

    yum install librdkafka-devel

準備配置

  1. 可選:如果是SSL接入點,需執行如下操作。

    1. 下載SSL根證書

    2. 執行以下命令安裝SSL依賴庫。

      yum install openssl openssl-devel
    3. 執行以下命令安裝SASL依賴庫。

      yum install cyrus-sasl{,-plain}
  2. 訪問aliware-kafka-demos,單擊code圖標,然后在下拉框選擇Download ZIP,下載Demo工程并解壓。

  3. 在解壓的Demo工程,找到kafka-cpp-demo文件夾,根據接入點類型找到對應文件夾,將此文件夾中的文件(如果是SSL接入點實例,包含證書SSL根證書文件)上傳至服務器。

發送消息

執行如下命令編譯kafka_producer.c并發送消息。

  1. 執行如下命令編譯kafka_producer.c。

    gcc -lrdkafka ./kafka_producer.c -o kafka_producer
  2. 執行如下命令,發送消息。

    • 默認接入點實例,執行如下命令。

      ./kafka_producer <bootstrap_servers> <topic>
    • SSL接入點實例,執行如下命令。

      ./kafka_producer <bootstrap_servers> <topic> <username> <password>

    參數

    描述

    bootstrap_servers

    實例接入點。您可在云消息隊列 Kafka 版控制臺實例詳情頁面的接入點信息區域獲取。

    topic

    Topic名稱。您可在云消息隊列 Kafka 版控制臺Topic 管理頁面獲取。

    username

    SASL用戶名。使用SSL接入點實例時,需配置該參數。

    說明
    • 如果實例未開啟ACL,您可以在云消息隊列 Kafka 版控制臺實例詳情頁面的配置信息區域獲取默認的用戶名密碼
    • 如果實例已開啟ACL,請確保要使用的SASL用戶已被授予向云消息隊列 Kafka 版實例收發消息的權限。具體操作,請參見SASL用戶授權

    password

    SASL用戶名密碼。使用SSL接入點實例時,需配置該參數。

消息程序kafka_producer.c示例代碼如下:

說明

使用代碼前,請先根據接入點類型,在代碼中文字描述處選擇對應代碼,或者根據文字描述注釋或刪除對應代碼。

/*
 * librdkafka - Apache Kafka C library
 *
 * Copyright (c) 2017, Magnus Edenhill
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * Simple Apache Kafka producer
 * using the Kafka driver from librdkafka
 * (https://github.com/edenhill/librdkafka)
 */

#include <stdio.h>
#include <signal.h>
#include <string.h>


/* Typical include path would be <librdkafka/rdkafka.h>, but this program
 * is builtin from within the librdkafka source tree and thus differs. */
#include "librdkafka/rdkafka.h"


static int run = 1;

/**
 * @brief Signal termination of program
 */
static void stop (int sig) {
        run = 0;
        fclose(stdin); /* abort fgets() */
}


/**
 * @brief Message delivery report callback.
 *
 * This callback is called exactly once per message, indicating if
 * the message was succesfully delivered
 * (rkmessage->err == RD_KAFKA_RESP_ERR_NO_ERROR) or permanently
 * failed delivery (rkmessage->err != RD_KAFKA_RESP_ERR_NO_ERROR).
 *
 * The callback is triggered from rd_kafka_poll() and executes on
 * the application's thread.
 */
static void dr_msg_cb (rd_kafka_t *rk,
                       const rd_kafka_message_t *rkmessage, void *opaque) {
        if (rkmessage->err)
                fprintf(stderr, "%% Message delivery failed: %s\n",
                        rd_kafka_err2str(rkmessage->err));
        else
                fprintf(stderr,
                        "%% Message delivered (%zd bytes, "
                        "partition %"PRId32")\n",
                        rkmessage->len, rkmessage->partition);

        /* The rkmessage is destroyed automatically by librdkafka */
}



int main (int argc, char **argv) {
        rd_kafka_t *rk;         /* Producer instance handle */
        rd_kafka_topic_t *rkt;  /* Topic object */
        rd_kafka_conf_t *conf;  /* Temporary configuration object */
        char errstr[512];       /* librdkafka API error reporting buffer */
        char buf[512];          /* Message value temporary buffer */
        const char *brokers;    /* Argument: broker list */
        const char *topic;      /* Argument: topic to produce to */
        const char *username;      /* Argument: topic to produce to */
        const char *password;      /* Argument: topic to produce to */

        /*
         * Argument validation
         */
        //請根據實例接入點類型選擇對應的if語句代碼。
        //如果是SSL接入點,請使用如下代碼。
        if (argc != 5) {
                fprintf(stderr, "%% Usage: %s <broker> <topic> <username> <password>\n", argv[0]);
                return 1;
        }
        //如果是默認接入點,請使用如下代碼。
        if (argc != 3) {
                fprintf(stderr, "%% Usage: %s <broker> <topic>\n", argv[0]);
                return 1;
        }

        brokers = argv[1];
        topic   = argv[2];
        username = argv[3];     //如果是默認接入點,請注釋或者刪除該行代碼。
        password = argv[4];     //如果是默認接入點,請注釋或者刪除該行代碼。




        /*
         * Create Kafka client configuration place-holder
         */
        conf = rd_kafka_conf_new();

        /* Set bootstrap broker(s) as a comma-separated list of
         * host or host:port (default port 9092).
         * librdkafka will use the bootstrap brokers to acquire the full
         * set of brokers from the cluster. */
        if (rd_kafka_conf_set(conf, "bootstrap.servers", brokers,
                              errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK) {
                fprintf(stderr, "%s\n", errstr);
                return 1;
        }
 
        //如果是默認接入點,請注釋或者刪除以下十行(if語句)代碼。
        if (rd_kafka_conf_set(conf, "ssl.ca.location", "ca-cert.pem", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    || rd_kafka_conf_set(conf, "security.protocol", "sasl_ssl", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    || rd_kafka_conf_set(conf, "ssl.endpoint.identification.algorithm", "None", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    || rd_kafka_conf_set(conf, "sasl.mechanism", "PLAIN", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    || rd_kafka_conf_set(conf, "sasl.username", username, errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    || rd_kafka_conf_set(conf, "sasl.password", password, errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                    ) {
                fprintf(stderr, "%s\n", errstr);
                return -1;
        }

        /* Set the delivery report callback.
         * This callback will be called once per message to inform
         * the application if delivery succeeded or failed.
         * See dr_msg_cb() above. */
        rd_kafka_conf_set_dr_msg_cb(conf, dr_msg_cb);


        /*
         * Create producer instance.
         *
         * NOTE: rd_kafka_new() takes ownership of the conf object
         *       and the application must not reference it again after
         *       this call.
         */
        rk = rd_kafka_new(RD_KAFKA_PRODUCER, conf, errstr, sizeof(errstr));
        if (!rk) {
                fprintf(stderr,
                        "%% Failed to create new producer: %s\n", errstr);
                return 1;
        }


        /* Create topic object that will be reused for each message
         * produced.
         *
         * Both the producer instance (rd_kafka_t) and topic objects (topic_t)
         * are long-lived objects that should be reused as much as possible.
         */
        rkt = rd_kafka_topic_new(rk, topic, NULL);
        if (!rkt) {
                fprintf(stderr, "%% Failed to create topic object: %s\n",
                        rd_kafka_err2str(rd_kafka_last_error()));
                rd_kafka_destroy(rk);
                return 1;
        }

        /* Signal handler for clean shutdown */
        signal(SIGINT, stop);

        fprintf(stderr,
                "%% Type some text and hit enter to produce message\n"
                "%% Or just hit enter to only serve delivery reports\n"
                "%% Press Ctrl-C or Ctrl-D to exit\n");

        while (run && fgets(buf, sizeof(buf), stdin)) {
                size_t len = strlen(buf);

                if (buf[len-1] == '\n') /* Remove newline */
                        buf[--len] = '\0';

                if (len == 0) {
                        /* Empty line: only serve delivery reports */
                        rd_kafka_poll(rk, 0/*non-blocking */);
                        continue;
                }

                /*
                 * Send/Produce message.
                 * This is an asynchronous call, on success it will only
                 * enqueue the message on the internal producer queue.
                 * The actual delivery attempts to the broker are handled
                 * by background threads.
                 * The previously registered delivery report callback
                 * (dr_msg_cb) is used to signal back to the application
                 * when the message has been delivered (or failed).
                 */
        retry:
                if (rd_kafka_produce(
                            /* Topic object */
                            rkt,
                            /* Use builtin partitioner to select partition*/
                            RD_KAFKA_PARTITION_UA,
                            /* Make a copy of the payload. */
                            RD_KAFKA_MSG_F_COPY,
                            /* Message payload (value) and length */
                            buf, len,
                            /* Optional key and its length */
                            NULL, 0,
                            /* Message opaque, provided in
                             * delivery report callback as
                             * msg_opaque. */
                            NULL) == -1) {
                        /**
                         * Failed to *enqueue* message for producing.
                         */
                        fprintf(stderr,
                                "%% Failed to produce to topic %s: %s\n",
                                rd_kafka_topic_name(rkt),
                                rd_kafka_err2str(rd_kafka_last_error()));

                        /* Poll to handle delivery reports */
                        if (rd_kafka_last_error() ==
                            RD_KAFKA_RESP_ERR__QUEUE_FULL) {
                                /* If the internal queue is full, wait for
                                 * messages to be delivered and then retry.
                                 * The internal queue represents both
                                 * messages to be sent and messages that have
                                 * been sent or failed, awaiting their
                                 * delivery report callback to be called.
                                 *
                                 * The internal queue is limited by the
                                 * configuration property
                                 * queue.buffering.max.messages */
                                rd_kafka_poll(rk, 1000/*block for max 1000ms*/);
                                goto retry;
                        }
                } else {
                        fprintf(stderr, "%% Enqueued message (%zd bytes) "
                                "for topic %s\n",
                                len, rd_kafka_topic_name(rkt));
                }


                /* A producer application should continually serve
                 * the delivery report queue by calling rd_kafka_poll()
                 * at frequent intervals.
                 * Either put the poll call in your main loop, or in a
                 * dedicated thread, or call it after every
                 * rd_kafka_produce() call.
                 * Just make sure that rd_kafka_poll() is still called
                 * during periods where you are not producing any messages
                 * to make sure previously produced messages have their
                 * delivery report callback served (and any other callbacks
                 * you register). */
                rd_kafka_poll(rk, 0/*non-blocking*/);
        }


        /* Wait for final messages to be delivered or fail.
         * rd_kafka_flush() is an abstraction over rd_kafka_poll() which
         * waits for all messages to be delivered. */
        fprintf(stderr, "%% Flushing final messages..\n");
        rd_kafka_flush(rk, 10*1000 /* wait for max 10 seconds */);

        /* Destroy topic object */
        rd_kafka_topic_destroy(rkt);

        /* Destroy the producer instance */
        rd_kafka_destroy(rk);

        return 0;
}

訂閱消息

編譯kafka_consumer.c并訂閱消息。

  1. 執行以下命令編譯kafka_consumer.c。

    gcc -lrdkafka ./kafka_consumer.c -o kafka_consumer
  2. 根據接入點類型,選擇命令執行以訂閱消息。

    • 默認接入點:執行如下命令訂閱消息。

      ./kafka_consumer -g <group> -b <bootstrap_servers> <topic>
    • SSL接入點:執行如下命令訂閱消息。

    ./kafka_consumer -g <group> -b <bootstrap_servers> -u <username> -p <password> <topic>

    參數

    描述

    group

    Group名稱。您可在云消息隊列 Kafka 版控制臺Group 管理頁面獲取。

    bootstrap_servers

    SSL接入點。您可在云消息隊列 Kafka 版控制臺實例詳情頁面的接入點信息區域獲取。

    username

    SASL用戶名。使用SSL接入點時,需配置該參數。

    說明
    • 如果實例未開啟ACL,您可以在云消息隊列 Kafka 版控制臺實例詳情頁面的配置信息區域獲取默認的用戶名密碼
    • 如果實例已開啟ACL,請確保要使用的SASL用戶已被授予向云消息隊列 Kafka 版實例收發消息的權限。具體操作,請參見SASL用戶授權

    password

    SASL用戶名密碼。使用SSL接入點時,需配置該參數。

    topic

    Topic名稱。您可在云消息隊列 Kafka 版控制臺Topic 管理頁面獲取。

消息程序kafka_consumer.c示例代碼如下:

說明

使用代碼前,請先根據接入點類型,在代碼中加粗文字描述處選擇對應代碼,或者根據加粗文字描述注釋或刪除對應代碼。

/*
 * librdkafka - Apache Kafka C library
 *
 * Copyright (c) 2015, Magnus Edenhill
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * Apache Kafka high level consumer example program
 * using the Kafka driver from librdkafka
 * (https://github.com/edenhill/librdkafka)
 */

#include <ctype.h>
#include <signal.h>
#include <string.h>
#include <unistd.h>
#include <stdlib.h>
#include <syslog.h>
#include <sys/time.h>
#include <errno.h>
#include <getopt.h>

/* Typical include path would be <librdkafka/rdkafka.h>, but this program
 * is builtin from within the librdkafka source tree and thus differs. */
#include "librdkafka/rdkafka.h"  /* for Kafka driver */


static int run = 1;
static rd_kafka_t *rk;
static int exit_eof = 0;
static int wait_eof = 0;  /* number of partitions awaiting EOF */
static int quiet = 0;
static     enum {
    OUTPUT_HEXDUMP,
    OUTPUT_RAW,
} output = OUTPUT_HEXDUMP;

static void stop (int sig) {
        if (!run)
                exit(1);
    run = 0;
    fclose(stdin); /* abort fgets() */
}


static void hexdump (FILE *fp, const char *name, const void *ptr, size_t len) {
    const char *p = (const char *)ptr;
    unsigned int of = 0;


    if (name)
        fprintf(fp, "%s hexdump (%zd bytes):\n", name, len);

    for (of = 0 ; of < len ; of += 16) {
        char hexen[16*3+1];
        char charen[16+1];
        int hof = 0;

        int cof = 0;
        int i;

        for (i = of ; i < (int)of + 16 && i < (int)len ; i++) {
            hof += sprintf(hexen+hof, "%02x ", p[i] & 0xff);
            cof += sprintf(charen+cof, "%c",
                       isprint((int)p[i]) ? p[i] : '.');
        }
        fprintf(fp, "%08x: %-48s %-16s\n",
            of, hexen, charen);
    }
}

/**
 * Kafka logger callback (optional)
 */
static void logger (const rd_kafka_t *rk, int level,
            const char *fac, const char *buf) {
    struct timeval tv;
    gettimeofday(&tv, NULL);
    fprintf(stdout, "%u.%03u RDKAFKA-%i-%s: %s: %s\n",
        (int)tv.tv_sec, (int)(tv.tv_usec / 1000),
        level, fac, rd_kafka_name(rk), buf);
}



/**
 * Handle and print a consumed message.
 * Internally crafted messages are also used to propagate state from
 * librdkafka to the application. The application needs to check
 * the `rkmessage->err` field for this purpose.
 */
static void msg_consume (rd_kafka_message_t *rkmessage) {
    if (rkmessage->err) {
        if (rkmessage->err == RD_KAFKA_RESP_ERR__PARTITION_EOF) {
            fprintf(stderr,
                "%% Consumer reached end of %s [%"PRId32"] "
                   "message queue at offset %"PRId64"\n",
                   rd_kafka_topic_name(rkmessage->rkt),
                   rkmessage->partition, rkmessage->offset);

            if (exit_eof && --wait_eof == 0) {
                                fprintf(stderr,
                                        "%% All partition(s) reached EOF: "
                                        "exiting\n");
                run = 0;
                        }

            return;
        }

                if (rkmessage->rkt)
                        fprintf(stderr, "%% Consume error for "
                                "topic \"%s\" [%"PRId32"] "
                                "offset %"PRId64": %s\n",
                                rd_kafka_topic_name(rkmessage->rkt),
                                rkmessage->partition,
                                rkmessage->offset,
                                rd_kafka_message_errstr(rkmessage));
                else
                        fprintf(stderr, "%% Consumer error: %s: %s\n",
                                rd_kafka_err2str(rkmessage->err),
                                rd_kafka_message_errstr(rkmessage));

                if (rkmessage->err == RD_KAFKA_RESP_ERR__UNKNOWN_PARTITION ||
                    rkmessage->err == RD_KAFKA_RESP_ERR__UNKNOWN_TOPIC)
                        run = 0;
        return;
    }

    if (!quiet)
        fprintf(stdout, "%% Message (topic %s [%"PRId32"], "
                        "offset %"PRId64", %zd bytes):\n",
                        rd_kafka_topic_name(rkmessage->rkt),
                        rkmessage->partition,
            rkmessage->offset, rkmessage->len);

    if (rkmessage->key_len) {
        if (output == OUTPUT_HEXDUMP)
            hexdump(stdout, "Message Key",
                rkmessage->key, rkmessage->key_len);
        else
            printf("Key: %.*s\n",
                   (int)rkmessage->key_len, (char *)rkmessage->key);
    }

    if (output == OUTPUT_HEXDUMP)
        hexdump(stdout, "Message Payload",
            rkmessage->payload, rkmessage->len);
    else
        printf("%.*s\n",
               (int)rkmessage->len, (char *)rkmessage->payload);
}


static void print_partition_list (FILE *fp,
                                  const rd_kafka_topic_partition_list_t
                                  *partitions) {
        int i;
        for (i = 0 ; i < partitions->cnt ; i++) {
                fprintf(stderr, "%s %s [%"PRId32"] offset %"PRId64,
                        i > 0 ? ",":"",
                        partitions->elems[i].topic,
                        partitions->elems[i].partition,
            partitions->elems[i].offset);
        }
        fprintf(stderr, "\n");

}
static void rebalance_cb (rd_kafka_t *rk,
                          rd_kafka_resp_err_t err,
              rd_kafka_topic_partition_list_t *partitions,
                          void *opaque) {

    fprintf(stderr, "%% Consumer group rebalanced: ");

    switch (err)
    {
    case RD_KAFKA_RESP_ERR__ASSIGN_PARTITIONS:
        fprintf(stderr, "assigned:\n");
        print_partition_list(stderr, partitions);
        rd_kafka_assign(rk, partitions);
        wait_eof += partitions->cnt;
        break;

    case RD_KAFKA_RESP_ERR__REVOKE_PARTITIONS:
        fprintf(stderr, "revoked:\n");
        print_partition_list(stderr, partitions);
        rd_kafka_assign(rk, NULL);
        wait_eof = 0;
        break;

    default:
        fprintf(stderr, "failed: %s\n",
                        rd_kafka_err2str(err));
                rd_kafka_assign(rk, NULL);
        break;
    }
}


static int describe_groups (rd_kafka_t *rk, const char *group) {
        rd_kafka_resp_err_t err;
        const struct rd_kafka_group_list *grplist;
        int i;

        err = rd_kafka_list_groups(rk, group, &grplist, 10000);

        if (err) {
                fprintf(stderr, "%% Failed to acquire group list: %s\n",
                        rd_kafka_err2str(err));
                return -1;
        }

        for (i = 0 ; i < grplist->group_cnt ; i++) {
                const struct rd_kafka_group_info *gi = &grplist->groups[i];
                int j;

                printf("Group \"%s\" in state %s on broker %d (%s:%d)\n",
                       gi->group, gi->state,
                       gi->broker.id, gi->broker.host, gi->broker.port);
                if (gi->err)
                        printf(" Error: %s\n", rd_kafka_err2str(gi->err));
                printf(" Protocol type \"%s\", protocol \"%s\", "
                       "with %d member(s):\n",
                       gi->protocol_type, gi->protocol, gi->member_cnt);

                for (j = 0 ; j < gi->member_cnt ; j++) {
                        const struct rd_kafka_group_member_info *mi;
                        mi = &gi->members[j];

                        printf("  \"%s\", client id \"%s\" on host %s\n",
                               mi->member_id, mi->client_id, mi->client_host);
                        printf("    metadata: %d bytes\n",
                               mi->member_metadata_size);
                        printf("    assignment: %d bytes\n",
                               mi->member_assignment_size);
                }
                printf("\n");
        }

        if (group && !grplist->group_cnt)
                fprintf(stderr, "%% No matching group (%s)\n", group);

        rd_kafka_group_list_destroy(grplist);

        return 0;
}



static void sig_usr1 (int sig) {
    rd_kafka_dump(stdout, rk);
}

int main (int argc, char **argv) {
        char mode = 'C';
    char *brokers = "localhost:9092";
    char *username = "123";
    char *password = "123";
    int opt;
    rd_kafka_conf_t *conf;
    rd_kafka_topic_conf_t *topic_conf;
    char errstr[512];
    const char *debug = NULL;
    int do_conf_dump = 0;
    char tmp[16];
    rd_kafka_resp_err_t err;
    char *group = NULL;
    rd_kafka_topic_partition_list_t *topics;
    int is_subscription;
    int i;

    quiet = !isatty(STDIN_FILENO);

    /* Kafka configuration */
    conf = rd_kafka_conf_new();

        /* Set logger */
        rd_kafka_conf_set_log_cb(conf, logger);

    /* Quick termination */
    snprintf(tmp, sizeof(tmp), "%i", SIGIO);
    rd_kafka_conf_set(conf, "internal.termination.signal", tmp, NULL, 0);

    /* Topic configuration */
    topic_conf = rd_kafka_topic_conf_new();

     while ((opt = getopt(argc, argv, "g:b:qd:eX:ADO")) != -1) {    //如果是默認接入點,請使用該語句。

    while ((opt = getopt(argc, argv, "g:b:u:p:qd:eX:ADO")) != -1) {     //如果是SSL接入點,請使用該語句。
        switch (opt) {
        case 'b':
            brokers = optarg;
            break;
        case 'g':
            group = optarg;
            break;
    //如果是默認接入點,請注釋或者刪除以下六行代碼(用戶名和密碼)。
        case 'u':
            username = optarg;
            break;
        case 'p':
            password = optarg;
            break;
        case 'e':
            exit_eof = 1;
            break;
        case 'd':
            debug = optarg;
            break;
        case 'q':
            quiet = 1;
            break;
        case 'A':
            output = OUTPUT_RAW;
            break;
        case 'X':
        {
            char *name, *val;
            rd_kafka_conf_res_t res;

            if (!strcmp(optarg, "list") ||
                !strcmp(optarg, "help")) {
                rd_kafka_conf_properties_show(stdout);
                exit(0);
            }

            if (!strcmp(optarg, "dump")) {
                do_conf_dump = 1;
                continue;
            }

            name = optarg;
            if (!(val = strchr(name, '='))) {
                fprintf(stderr, "%% Expected "
                    "-X property=value, not %s\n", name);
                exit(1);
            }

            *val = '\0';
            val++;

            res = RD_KAFKA_CONF_UNKNOWN;
            /* Try "topic." prefixed properties on topic
             * conf first, and then fall through to global if
             * it didnt match a topic configuration property. */
            if (!strncmp(name, "topic.", strlen("topic.")))
                res = rd_kafka_topic_conf_set(topic_conf,
                                  name+
                                  strlen("topic."),
                                  val,
                                  errstr,
                                  sizeof(errstr));

            if (res == RD_KAFKA_CONF_UNKNOWN)
                res = rd_kafka_conf_set(conf, name, val,
                            errstr, sizeof(errstr));

            if (res != RD_KAFKA_CONF_OK) {
                fprintf(stderr, "%% %s\n", errstr);
                exit(1);
            }
        }
        break;

                case 'D':
                case 'O':
                        mode = opt;
                        break;

        default:
            goto usage;
        }
    }


    if (do_conf_dump) {
        const char **arr;
        size_t cnt;
        int pass;

        for (pass = 0 ; pass < 2 ; pass++) {
            if (pass == 0) {
                arr = rd_kafka_conf_dump(conf, &cnt);
                printf("# Global config\n");
            } else {
                printf("# Topic config\n");
                arr = rd_kafka_topic_conf_dump(topic_conf,
                                   &cnt);
            }

            for (i = 0 ; i < (int)cnt ; i += 2)
                printf("%s = %s\n",
                       arr[i], arr[i+1]);

            printf("\n");

            rd_kafka_conf_dump_free(arr, cnt);
        }

        exit(0);
    }


    if (strchr("OC", mode) && optind == argc) {
    usage:
        fprintf(stderr,
            "Usage: %s [options] <topic[:part]> <topic[:part]>..\n"
            "\n"
            "librdkafka version %s (0x%08x)\n"
            "\n"
            " Options:\n"
            "  -g <group>      Consumer group (%s)\n"
            "  -b <brokers>    Broker address (%s)\n"
            "  -u <username>   sasl plain username (%s)\n"    //如果是默認接入點,請注釋或刪除該行代碼。
            "  -p <password>   sasl plain password (%s)\n"     //如果是默認接入點,請注釋或刪除該行代碼。
            "  -e              Exit consumer when last message\n"
            "                  in partition has been received.\n"
                        "  -D              Describe group.\n"
                        "  -O              Get commmitted offset(s)\n"
            "  -d [facs..]     Enable debugging contexts:\n"
            "                  %s\n"
            "  -q              Be quiet\n"
            "  -A              Raw payload output (consumer)\n"
            "  -X <prop=name> Set arbitrary librdkafka "
            "configuration property\n"
            "               Properties prefixed with \"topic.\" "
            "will be set on topic object.\n"
            "               Use '-X list' to see the full list\n"
            "               of supported properties.\n"
            "\n"
                        "For balanced consumer groups use the 'topic1 topic2..'"
                        " format\n"
                        "and for static assignment use "
                        "'topic1:part1 topic1:part2 topic2:part1..'\n"
            "\n",
            argv[0],
            rd_kafka_version_str(), rd_kafka_version(),
                        group, brokers, username, password,      //如果是默認接入點實例,請刪除該行代碼中后面的用戶名和密碼(username, password,)。
            RD_KAFKA_DEBUG_CONTEXTS);
        exit(1);
    }


    signal(SIGINT, stop);
    signal(SIGUSR1, sig_usr1);

    if (debug &&
        rd_kafka_conf_set(conf, "debug", debug, errstr, sizeof(errstr)) !=
        RD_KAFKA_CONF_OK) {
        fprintf(stderr, "%% Debug configuration failed: %s: %s\n",
            errstr, debug);
        exit(1);
    }

        /*
         * Client/Consumer group
         */

        if (strchr("CO", mode)) {
                /* Consumer groups require a group id */
                if (!group)
                        group = "rdkafka_consumer_example";
                if (rd_kafka_conf_set(conf, "group.id", group,
                                      errstr, sizeof(errstr)) !=
                    RD_KAFKA_CONF_OK) {
                        fprintf(stderr, "%% %s\n", errstr);
                        exit(1);
                }

                /* Consumer groups always use broker based offset storage */
                if (rd_kafka_topic_conf_set(topic_conf, "offset.store.method",
                                            "broker",
                                            errstr, sizeof(errstr)) !=
                    RD_KAFKA_CONF_OK) {
                        fprintf(stderr, "%% %s\n", errstr);
                        exit(1);
                }

                /* Set default topic config for pattern-matched topics. */
                rd_kafka_conf_set_default_topic_conf(conf, topic_conf);

                /* Callback called on partition assignment changes */
                rd_kafka_conf_set_rebalance_cb(conf, rebalance_cb);

                rd_kafka_conf_set(conf, "enable.partition.eof", "true",
                                  NULL, 0);

        }

    //如果是默認接入點,請注釋或刪除以下十行(if語句)代碼。
        if (rd_kafka_conf_set(conf, "ssl.ca.location", "ca-cert.pem", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                || rd_kafka_conf_set(conf, "security.protocol", "sasl_ssl", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                || rd_kafka_conf_set(conf, "sasl.mechanism", "PLAIN", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                || rd_kafka_conf_set(conf, "ssl.endpoint.identification.algorithm", "None", errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                || rd_kafka_conf_set(conf, "sasl.username", username, errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
                || rd_kafka_conf_set(conf, "sasl.password", password, errstr, sizeof(errstr)) != RD_KAFKA_CONF_OK
           ) {
            fprintf(stderr, "%s\n", errstr);
            return -1;
        }

        /* Create Kafka handle */
        if (!(rk = rd_kafka_new(RD_KAFKA_CONSUMER, conf,
                                errstr, sizeof(errstr)))) {
                fprintf(stderr,
                        "%% Failed to create new consumer: %s\n",
                        errstr);
                exit(1);
        }

        /* Add brokers */
        if (rd_kafka_brokers_add(rk, brokers) == 0) {
                fprintf(stderr, "%% No valid brokers specified\n");
                exit(1);
        }


        if (mode == 'D') {
                int r;
                /* Describe groups */
                r = describe_groups(rk, group);

                rd_kafka_destroy(rk);
                exit(r == -1 ? 1 : 0);
        }

        /* Redirect rd_kafka_poll() to consumer_poll() */
        rd_kafka_poll_set_consumer(rk);

        topics = rd_kafka_topic_partition_list_new(argc - optind);
        is_subscription = 1;
        for (i = optind ; i < argc ; i++) {
                /* Parse "topic[:part] */
                char *topic = argv[i];
                char *t;
                int32_t partition = -1;

                if ((t = strstr(topic, ":"))) {
                        *t = '\0';
                        partition = atoi(t+1);
                        is_subscription = 0; /* is assignment */
                        wait_eof++;
                }

                rd_kafka_topic_partition_list_add(topics, topic, partition);
        }

        if (mode == 'O') {
                /* Offset query */

                err = rd_kafka_committed(rk, topics, 5000);
                if (err) {
                        fprintf(stderr, "%% Failed to fetch offsets: %s\n",
                                rd_kafka_err2str(err));
                        exit(1);
                }

                for (i = 0 ; i < topics->cnt ; i++) {
                        rd_kafka_topic_partition_t *p = &topics->elems[i];
                        printf("Topic \"%s\" partition %"PRId32,
                               p->topic, p->partition);
                        if (p->err)
                                printf(" error %s",
                                       rd_kafka_err2str(p->err));
                        else {
                                printf(" offset %"PRId64"",
                                       p->offset);

                                if (p->metadata_size)
                                        printf(" (%d bytes of metadata)",
                                               (int)p->metadata_size);
                        }
                        printf("\n");
                }

                goto done;
        }


        if (is_subscription) {
                fprintf(stderr, "%% Subscribing to %d topics\n", topics->cnt);

                if ((err = rd_kafka_subscribe(rk, topics))) {
                        fprintf(stderr,
                                "%% Failed to start consuming topics: %s\n",
                                rd_kafka_err2str(err));
                        exit(1);
                }
        } else {
                fprintf(stderr, "%% Assigning %d partitions\n", topics->cnt);

                if ((err = rd_kafka_assign(rk, topics))) {
                        fprintf(stderr,
                                "%% Failed to assign partitions: %s\n",
                                rd_kafka_err2str(err));
                }
        }

        while (run) {
                rd_kafka_message_t *rkmessage;

                rkmessage = rd_kafka_consumer_poll(rk, 1000);
                if (rkmessage) {
                        msg_consume(rkmessage);
                        rd_kafka_message_destroy(rkmessage);
                }
        }

done:
        err = rd_kafka_consumer_close(rk);
        if (err)
                fprintf(stderr, "%% Failed to close consumer: %s\n",
                        rd_kafka_err2str(err));
        else
                fprintf(stderr, "%% Consumer closed\n");

        rd_kafka_topic_partition_list_destroy(topics);

        /* Destroy handle */
        rd_kafka_destroy(rk);

    /* Let background threads clean up and terminate cleanly. */
    run = 5;
    while (run-- > 0 && rd_kafka_wait_destroyed(1000) == -1)
        printf("Waiting for librdkafka to decommission\n");
    if (run <= 0)
        rd_kafka_dump(stdout, rk);

    return 0;
}